User's Manual

Features
Top view
Features
1 PCI slot one
1
Install a PCI card.
2 PCIe(x16) slot or PCI slot two
1
Install a PCIe or PCI card.
3 Power switch Turn on or off the Embedded Box PC.
4 Remote power switch
2
Install a remote power switch.
5 Hard reset Using a pin, press the button located
in the pin hole to restart the
Embedded Box PC.
6 Network port one Connect an Ethernet (RJ45) cable for
network access. Provides data transfer
speeds up to 10/100/1000 Mbps.
7 USB 3.0 ports (4) Connect USB enabled devices.
Provides data transfer speeds up to 5
Gbps.
8 Network port two Connect an Ethernet (RJ45) cable for
network access. Provides data transfer
speeds up to 10/100/1000 Mbps.
6