User's Manual
Table Of Contents
Features
10 Mobile broadband antenna
port one
Connect a mobile broadband antenna
to increase the range and strength of
the mobile broadband signals.
11 RS232/RS422/RS485 port
three (configurable in the
BIOS)
Connect a RS232/RS422/RS485 cable
to the Embedded Box PC.
12 RS232/RS422/RS485 port two
(configurable in the BIOS)
Connect a RS232/RS422/RS485 cable
to the Embedded Box PC.
13 Wireless antenna port two Connect a wireless antenna to
increase the range and strength of the
wireless signals.
14 RS232/RS422/RS485 port one
(configurable in the BIOS)
Connect a RS232/RS422/RS485 cable
to the Embedded Box PC.
15 Wireless antenna port one Connect a wireless antenna to
increase the range and strength of the
wireless signals.
1 GPIO-In port has a total of 9 pins, except GND pin, the other 8 pins are GPI0 to GPI7.
2 Connections made to these ports must be an SELV circuit and the wire (26 AWG - 18 AWG) must
have Double Insulation (DI) or Reinforced Insulation (RI) to protect it from all hazardous voltages.
Torque the screws at 2.88 kg-cm (2.5 lb-in) to secure the wire to the connector.
3 GPIO-Out port has a total of 9 pins, except GND pin, the other 8 pins are GPO0 to GPO7.
4 Connections made to GPIO IN/OUT must be SELV Circuits (30 Vmax) and must be Double/
Reinforced Insulation (DI) (RI) from all hazardous voltages.
9