User's Manual

Figure 4-18 Removing the dummy card
1
2
1. Memory media slot 2. Dummy card
2. Turn the memory media so that the contacts (metal areas) face up.
3. Insert the memory media into the memory media slot on the side of
the computer.
Figure 4-19 Inserting a memory media
1
2
1. Memory media slot 2. Memory media
Make sure the memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able to
remove it.
When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be
lost.
4. Push the memory media gently until you hear a click.
Removing a memory media
The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
1. Click the Desktop tile and open the Safely Remove Hardware and
Eject Media icon on the Windows Taskbar.
User's Manual 4-25