User Manual

119 Configuring the Wireless LAN
Configuring the Wireless LAN
The WLAN device can be configured to establish wireless network connectivity using the software that
is built into Windows. Support for most industry standard security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with your network
administrator for these parameters:
Configuring the WLAN Using Windows
1 Click the Start button, then select Control Panel.
2 If the Control Panel is not in icon view, select select one of the icon views in View by:. Click the Network and
Sharing Center icon.
3 Select Connect to a network in the bottom panel.
4 Select one of the listed networks, then click [Connect].
5 Follow the directions that appear.
In the event you require assistance, go to the Network and Sharing Center window (Start -> Control Panel ->
Network and Sharing Center), and type in relevant keywords in the Search box.
Connecting to a Network
After you have configured your computer, you can connect to an active network by performing the
following steps:
1 Click on the WLAN icon in the system tray.
2 Select “Connect to a network”.
3 Select a network from the list that appears, and click the [Connect] button.