User's Manual
Table Of Contents
- Contents
- About this Document
- Introduction
- AP Network Attachment and Configuration
- AP Web Server
- Regulatory Compliance Information
A
Appendix
A-34 • AP User’s Guide Atheros Communications, Inc.
A-34 • March 2003 COMPANY CONFIDENTIAL
Follow these steps to enable firmware updates:
1. From the Firmware Update Basic window, click on Advanced.
The AP Firmware Update Advanced Configuration window appears
(see Figure A-21).
The Firmware Update Advanced Configuration window allows the
setting of new information on the FTP location of new firmware or
filename of the firmware.
2. Enter the Host Name or host PC’s IP address, User Name, Password,
Image Path, and Image Name in the data-entry fields.
To revert to the default-vendor values, click Use Factory FTP Location.
3. Click Update Firmware to store the new firmware changes.
To restore the previous firmware, click Restore.
Figure A-21. Advanced Firmware Update Configuration Window