User Manual

D
O
N
O
T
C
O
P
Y
PRELIMINARY Chapter
3
Atheros Communications, Inc. Windows Millennium Edition 3-9
COMPANY CONFIDENTIAL July 2002 3-9
Table 3-1 provides descriptions for the fields on the Network Configuration
Setting, Advanced tab dialog.
To change the encryption type, take the following steps:
1. Select Encryption Algorithm.
2. Select the desired setting from the Value menu.
Table 3-1. Advanced Dialog Field Descriptions
Field Name Description
Wireless Mode Specifies 802.11a, 802.11b, or autoselect operation.
Autoselect allows the use of both 802.11a and 802.11b
modes.
Ad Hoc Mode Specifies a band to establish an ad hoc network if no
matching SSID is found after scanning all available
modes.
802.11a Turbo Enables or disables Atheros turbo mode for 802.11a
radio space. Once enabled, both 802.11a and 802.11a
turbo modes are scanned.
802.11g (Pure g) Enables or disables OFDM at 2.4 GHz in the 802.11b
radio space.
802.11b Range Selects either normal (uses all four 802.11b transmit
rates) or extended range (limits network to 1 or 2 Mbit
range).
Encryption Type Specifies the encryption type:s
WEP - use only WEP encryption.
AES - only associate with Access Points that can
successfully negotiate AES encryption.
Auto - Allow the STA and AP to negotiate the
encryption type.
Scan Mode Specifies passive, or auto scannings (use country code
to select the type of scan, active or passive).
Transmit Power Selects full, half, quarter, eighth, or minimum transmit
power.
QoS Disables or enables the station to cooperate in a net-
work using Quality of Service.
CAUTION: To successfully transmit data frames, specify a unique key.
NOTE: If AES and ad hoc are both specified, the STA will use WEP.
NOTE: Fragmentation is currently not supported using AES.