User's Manual

85 - Device Ports
2 Push the connector into the port until it is seated.
3 Tighten the two hold-down screws, located on each end of the connector.
P
RESSING THE [FN] + [F10] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND
YOUR DISPLAY VIDEO. THE ORDER IS DETERMINED BY WHICH TYPE OF EXTERNAL VIDEO DEVICE(S) IS
CONNECTED. EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT CHOICE.
I
F YOU ONLY HAVE AN EXTERNAL CRT CONNECTED, THE ORDER IS: INTERNAL DISPLAY -> EXTERNAL
CRT ->
SIMULTANEOUS DISPLAY -> INTERNAL DISPLAY.
If you only have an HDMI device
connected, the order is: internal
display -> HDMI display ->
simultaneous display -> internal
display.
If you have external CRT and HDMI
devices connected, the order is:
internal display -> external CRT ->
simultaneous internal and external
CRT -> HDMI display - simultaneous
internal and HDMI display -> internal
display.
Figure 39. Connecting an External Video Device
External Video Port
External Video Cable
Sparrow T580.book Page 85 Friday, October 1, 2010 9:11 AM
DRAFT