Installation Guide

Page 9 of 9
Industry Canada requires the following wording to the end user in French and English:
Industry Canada Notice:
This device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmitting antenna) that is installed outdoors is subject to
licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit
RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health
Canada's web site
www.hc-sc.gc.ca/rpb.
"This Class B digital apparatus complies with Canadian ICES-003"
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
Avis de Conformité à la Réglementation d'Industrie Canada:
Pour empêcher toute interférence aux services faisant l'objet d'une licence, cet appareil doit être
utilisé à l'intérieur seulement et devrait être placé loin des fenêtres afin de fournir un écran de
blindage maximal. L'installateur du présent matériel radio doit s'assurer que l'antenne est située ou
pointée de manière à ce que cette dernière n'émette pas de champs radioélectriques supérieurs aux
limites specifées par Santé Canada pour le grand public; consulter le Code de sécurité 6, disponible
sur le site Web de Santé Canada, à l'adresse suivante: www.hc-sc.gc.ca/rpb.
End of Required User Manual Wording to end user provided by radio/system integrator