User Manual
Table Of Contents
- Device Types
- Shipping Package Contents
- System Requirements
- Inserting and Removing the Wireless LAN Client Adapter
- Installing the Wireless LAN Client Adapter Driver
- Confirming the Installation
- Uninstalling the Windows Wireless Drivers
- Service Set Identifiers
- Wireless Bands and Channels
- WZC Overview
- Accessing WZC
- Wireless Security
NOTE: The WLAN Client Adapter may be limited to a single frequency band or a restricted range of radio
frequencies (channels) within a frequency band depending on regulatory requirements. See the Regulatory
section of this document for additional regulatory information.
WZC Overview
WZC enables you to perform the following functions:
Obtain a view of the wireless networks within radio range, including the security mode of the wireless
network, the signal strength of the wireless network and the wireless network with which you are
associated.
Scan (Refresh Network List) and connect to wireless networks within radio range of your wireless LAN
adapter.
Create or select a profile, which stores the specifics of the network connection and security selections for
your Wireless LAN Client Adapter.
Accessing WZC
Typically, the default setting for network adapters is to have a wireless icon appear in the system tray
which typically appears in the right bottom corner of the Windows XP display:
WZC wireless adapter icon
Double clicking on this icon will cause the display of the Wireless Network Connection Status page.
Installation and User Guide: WFB400 Windows Wireless LAN Client Page 15 of 29