User's Manual

Requirements and Setup
80-VT830-1 Rev. A 5 Qualcomm Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
1
Figure 2-2 Basic DFS test setup diagram for WCN1320 Ethernet-based AP 2
2.2 AP and client setup 3
4
2.2.1 Qualcomm AP setup 5
6
5. Wait for 3 to 4 seconds, the LP2 will give a sound indication for the USB device detection. 7
6. Open the “Tera Term Pro” console application from desktop of LP2. 8
7. Configure the port as COM2 from Tera Term Pro -> Setup->Port. 9
8. If Qualcomm Master Device is a PCIe AP/Router then configure / set the baud rate to 10
115200 from Tera Term Pro -> Setup->Baud rate. If Qualcomm Master Device is an 11
Ethernet AP/Router then configure / set the baud rate to 38400 from Tera Term Pro -> 12
Setup->Baud rate. 13
9. Connect the serial connector of Keyspan adapter to serial port of Qualcomm Master Device. 14
15
Laptop- 2 (HP)
Laptop- 1 (IBM)
Qualcomm WCN1320-
based Ethernet
AP
(Master Device (D
Keyspan Serial
to USB Adapter
Serial Port (DB-9) LAN ports
5 Volts power in
USB interface
Power in
5 Volts power adapter HP power adapter
IBM
power
adapter
USB interface
AC
Mains
Linksys
WUSB600N Client
(Slave Device)
Power in