User's Manual

Requirements and Setup
80-VT830-1 Rev. A 6 Qualcomm Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
2.2.2 Client (slave) setup 1
1. Confirm that the Qualcomm Master Device is configured and running. 2
2. Insert the Linksys USB600N client to any USB 2.0 interface of LP1. 3
3. Confirm that the Linksys WUSB600N client has automatically associated with the 4
Qualcomm Mater device. 5
6
NOTE
The Qualcomm Master device has default network name (SSID) as “Qualcomm-
FCC”.
The association of Linksys WUSB600N client to Qualcomm Master Device can be confirmed by 7
issuing the following command to Qualcomm Master Device through Tera Term Pro console on 8
LP2: 9
Command: aniSdkTool –g sta 10
Output: MAC address of the associated client device 11
--- Station parameters --- 12
ifIndex: 8 13
MAC: 00:1c:10:eb:00:cb 14
15
Total: 1 16
17
18
LP1: IBM T43 19
20
21
Figure 2-3 Client setup 22
23
24