User's Manual

80-VT857-1 Rev. A 7 Qualcomm Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
2 Modular Installation
This section provides typical modular installation instructions for the EA544D family of Ethernet
adapters, product labeling, and product usage information.
2.1 Typical modular installation
Figure 2-1 shows prototype housing for the EA544D family of Ethernet adapters. Remove the six
(6) screws from the front (2 screws), top (2 screws), and top back edge of the housing.
Figure 2-1 Prototype housing with internal EA544D Ethernet adapter
The installation of the EA544D within the housing is shown in Figure 2-2. Position the adapter so
that the Ethernet connector is facing the front of the housing and the metal shield on the EA544D
is facing the top of the housing. The adapter fastens to the housing between top (metal brackets)
and bottom (ventilated plate) supports with six (6) screws. Tighten the screws through the holes
provided in the top bracket, the EA544D, and the bottom bracket, aligning the holes of the
brackets and EA544D with the screw receptacles on the bottom of the housing.