User's Manual

Performance Test Configuration
80-VT321-1 B 14 Qualcomm Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
5.3 Connecting wired device to AP and STA 1
The typical throughput test configuration is to have one wired device connected to the AP and
one to the STA, and measure throughput between the two wired devices. These devices can be
PCs, STBs, etc.
2
3
4
5
6
7
8
9
10
Figure 5-1 shows how to connect the wired device to the AP and STA.
Figure 5-1 Connecting wired device to AP and STA
Qualcomm WCN1320-based AP and STA reference designs are equipped with four 1000Base-T
LAN ports on an AP router or a single port on a dongle AP/STA. Using these ports on the AP and
STA and a PC equipped with a 1000Base-T will yield the best throughput results.