User's Manual

80-VT321-1 B 8 Qualcomm Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
3 AP 1
2
4
5
6
8
9
10
This chapter provides information regarding AP software and hardware compatibility.
3.1 AP configuration tools 3
The Qualcomm WCN1320-based evaluation AP runs on Linux 2.6.25 and is based on an AMCC
processor. The AP can be configured using aniSdkTool, a CLI-based utility application. Note that
many common broadband gateway functions are not included in this release (NAT, firewall, etc.).
3.2 AP hardware 7
One device in your hardware kit should be clearly labeled as AP.
This release supports the reference designs listed in Table 3-1.
Table 3-1 Supported AP hardware
Common name Part number Description
AP DC544D_2 Router with 4x4 WLAN PCIe daughter card and AP software
AP DC544D_3 Router with 4x4 WLAN PCIe daughter card and AP software
AP EA544D_2 4x4 WLAN Ethernet adapter card and AP software
AP EA544D_3 4x4 WLAN Ethernet adapter card and AP software
3.3 Connecting to the AP 11
You can control the AP by connecting an Ethernet cable to one of its four LAN ports on the AP
router or to a single LAN port on a dongle AP.
12
13
14
15
16
17
The CLI-based application, aniSdkTool, is run from the shell on the AP. The shell is accessible
through any of the four LAN ports using telnet. The LAN ports’ default IP address is
192.168.1.254 with a subnet mask of 255.255.255.0.
Telnet login is “root” with no password.