User's Manual
Table Of Contents
80-JA863-1 Rev. A 21 QUALCOMM Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
FENWAY Global User Guide for UMTS/GSM Standards and Regulatory Compliance
UMTS band < 0 dBi
ISM band < 2.0 dBi
4. Independent Fenway module operation — the Fenway module must not be co-located
or jointly operated with any other transmitter or antenna within the host device.
5. A label with the following statements must be attached to the host end product:
This device contains Tx FCC ID: J9CFENWAY-1
This equipment contains equipment certified under IC: 2723A-FENWAY-1
6. The host end product must include a user manual that clearly defines operating
requirements and conditions that must be observed to ensure compliance with current
FCC/IC RF exposure guidelines.
7. The host end product must also pass the FCC Part 15 unintentional emission testing
requirement and be properly authorized per FCC Part 15.
For portable devices, in addition to conditions 3 through 6 described above, a separate
approval is required to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102.
5.2.3 EU compliance
The technical construction file of the Fenway module has been approved by the CCS
notify body. The product is in conformity with the following standards for mobile
operation in the EU:
EN 301 489 -01
EN 301 489 -07
EN 301 489 - 17
EN 301 489 -24
EN 301 511
EN 301 908 -01
EN 301 908 -02
EN 300 328
EN 50360
A CE mark shall be attached to the product.