User's Manual

RELEASED INTERNAL USE ONLY

Converting the fixed phone Radio Antenna Unit (RAU) Remote Antenna Fixed Phone Rework Instructions

4 80-99438-1EN Rev. -

Figure 5. Yellow ribbon and black and white wire disconnected

5. Place the front housing off to the side with the attached CCA up. Do not

remove the CCA from the front housing.

6. Unscrew the 10 Phillips head screws holding the module (two boards on a

mounting plate) in place and slowly lift it up to reveal the connections to

the antenna. Be careful not to jerk up on the module as this may damage

the two cables connected to the boards on the under side of the module.

Figure 6. Module exposed

Note

Do not unscrew the two Phillips head screws that keep the module

together. When the antenna is pointed up, this screw is the one in

the second position from the left at the top of the module (1) and the

second position from the right at the bottom of the module (2).