User's Manual

RELEASED INTERNAL USE ONLY
RELEASED INTERNAL USE ONLY
Remote Antenna Fixed Phone Rework Instructions Converting the fixed phone Radio Antenna Unit (RAU)
80-99438-1EN Rev. - 7
Note
It is very important to distinguish between the Tx and Rx cables
and connect them correctly. They are marked on the brass plug.
Connecting them in reverse can damage the unit.
12. Connect the brass plug connectors to J6 (Tx) and J4 (Rx) on the module,
and tie them together with a plastic tie.
Figure 10. Brass plug connectors connected
13. Place the module back into the rear housing and screw down the 10
Phillips head screws that hold it in place.
Figure 11. Module replaced