User's Manual

RELEASED INTERNAL USE ONLY
RELEASED INTERNAL USE ONLY
Converting the fixed phone Radio Antenna Unit (RAU) Remote Antenna Fixed Phone Rework Instructions
8 80-99438-1EN Rev. -
14. Reconnect the module to the top housing by connecting the black and
white wire to J5 and securing (push down) the yellow flex ribbon cable to
J1.
Figure 12. Module reconnected to top housing
15. Replace the front housing and the 11 screws.
Figure 13. RAU top housing replaced
16. Carefully reinstall the interface CCA making sure the 30-pin connector is
correctly located over the 30 pins sticking through the opening in the front
housing. Fasten it down with the four screws.