User's Manual

Operation

Using the phone in a vehicle

Attaching the phone to the Globalstar

Installation Kit

1. Remove the kit connector cover label from the back of the

phone.

2. Remove rubber plug from connector at bottom of phone. Rotate

rubber plug toward antenna.

3. Insert the connector on the bottom of the cradle into the

connector on the phone.

4. Push the phone down and back until it locks into place. You

should hear a click.

5. To remove the phone, press the release button at the top of the

cradle, and gently remove the phone.

6. Replace the rubber plug in the connector.

Remove

This

Sticker

80-C6303-1.book Page 17 Friday, June 30, 2006 3:12 PM

Released - Internal Use Only

Chau, Hai (hchau) 09/06/06