Product Info

ManualsBrandsQualcomm Technologies ManualsElectronicsQC64MA 802.11ad/ay module

Qualcomm Technologies, Inc.

For additional information or to submit technical questions, go to: https://createpoint.qti.qualcomm.com

Confidential and Proprietary – Qualcomm Technologies, Inc.

NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or websites to:

DocCtrlAgent@qualcomm.com.

Restricted Distribution: Not to be distributed to anyone who is not an employee of either Qualcomm Technologies, Inc. or its affiliated

companies without the express approval of Qualcomm Configuration Management.

Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express

written permission of Qualcomm Technologies, Inc.

All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries.

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names

may be trademarks or registered trademarks of their respective owners.

This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and

international law is strictly prohibited.

Qualcomm Technologies, Inc.

5775 Morehouse Drive

San Diego, CA 92121

U.S.A.

QC64MA Integrator Instructions

80-YD142-3 Rev. E

June 6, 2019

Summary of content (12 pages)

PAGE 1
Qualcomm Technologies, Inc. QC64MA Integrator Instructions 80-YD142-3 Rev. E June 6, 2019 For additional information or to submit technical questions, go to: https://createpoint.qti.qualcomm.com Confidential and Proprietary – Qualcomm Technologies, Inc. NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or websites to: DocCtrlAgent@qualcomm.com. Restricted Distribution: Not to be distributed to anyone who is not an employee of either Qualcomm Technologies, Inc.
PAGE 2
Revision history 80-YD142-3 Rev. E Revision Date Description A April 2019 Initial release B May 2019 Updated C May 2019 Additional content added to Section 5.1, page 10 and minor edits. D June 2019 Updated Section 2.2 E June 2019 Updated section 5.2 with “Operation on Aircraft Statement”. Confidential and Proprietary – Qualcomm Technologies, Inc. MAY CONTAIN U.S.
PAGE 3
Contents 1 Introduction .............................................................................................................................. 4 1.1 Applicable module...................................................................................................................................... 4 1.2 Purpose and scope .................................................................................................................................... 4 2 Available Global Modular Approvals .....
PAGE 4
1 Introduction 1.1 Applicable module  Part number: QC64MA (regulatory model name: QC64MA)  FCC ID: J9C-QC64MA  IC: 2723A-QC64MA 1.2 Purpose and scope This document describes the steps that the OEM integrator must follow when designing and manufacturing a system utilizing a Qualcomm Technologies Inc. (QTI) design radio module (the “Module”).
PAGE 5
2 Available Global Modular Approvals 2.1 Qualcomm approval Module certification is limited to those countries for which Qualcomm has obtained radio modular approvals. For integrators to access the current list of certified countries: 1. Log on to the Qualcomm CreatePoint system. 2. Search for the regulatory document under chip model QCA6438.
PAGE 6
3 Antenna Placement and RF Safety For a 60GHz antenna inside the host, the antenna-to-user separation distance must be greater than 20 cm. WARNING: Failure to adhere to these separation/spacing rules will invalidate FCC certification for the Module. 3.1 Simultaneous transmission The FCC imposes conditions and limitations when additional radio(s) are co-located in the same host system as the Module with the capability to transmit simultaneously. To download FCC rules for co-located radios: 1.
PAGE 7
4 Required Labels 4.1 Federal Communications Commission The FCC requires: ■ A label on the outside of the host system that is visible to the end user (see Figure 4-1). □ To complete the label, enter the actual IDs listed in Section 1.1. ■ A logo signifying emissions compliance on the outside of the host system (see Figure 4-2). □ Additional options are available for placement of the FCC label on the host. Please refer to the FCC Knowledge Database KDB784748 found at https://apps.fcc.
PAGE 8
QC64MA Integrator Instructions Required Labels 4.2 Taiwan National Communications Commission The Taiwan National Communications Commission (NCC) requires a label on the outside of the host system that is visible to the end user (see Figure 4-3). To complete the label, enter the actual IDs listed in Section 1.1. 本產品內含射頻模組: XXXXXXXXXX Figure 4-3 Taiwan NCC label 4.
PAGE 9
5 Required Regulatory Wording The integrator must include text in the user manual meeting regulators’ requirements. The text below or similar wording should be used. 5.1 FCC compliance information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 10
QC64MA Integrator Instructions Required Regulatory Wording This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No.004-000-00345-4. Radiation Exposure Statement The product complies with the FCC mobile RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
PAGE 11
QC64MA Integrator Instructions Required Regulatory Wording Operation on Aircraft Statement This device is not to be operated on aircraft except for the conditions listed on ISED RSS-210 Annex J.1 5.3 Taiwan user manual 台灣: 國家通訊傳播委員會低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 80-YD142-3 Rev.
PAGE 12
6 OEM Integrator Checklist The party below will implement the Qualcomm Module in host systems in accordance with the instructions specified in this document and the documents referenced herein.  The OEM integrator will ensure the Module is integrated in a host system using only the approved antenna model(s) described in this document.