QUALCOMM Globalstar GSP-1600 Tri-Mode Phone User Guide Info Clr Send 1 End abc 2 def 3 ghi 4 jkl 5 mno6 prs 7 tuv 8 wxyz9 * +0 # pwr
This guide is based on the production version of the QUALCOMM Globalstar GSP-1600 Tri-Mode Phone. Software changes may have occurred after this printing. QUALCOMM reserves the right to make changes in technical and product specifications without prior notice. QUALCOMM Incorporated 5775 Morehouse Drive, San Diego, CA 92121-1710 Document Number 80-98153-1EN RevModel Number CKABP0001 Copyright 1999 QUALCOMM® Incorporated All rights reserved. QUALCOMM® is a registered trademark of QUALCOMM Incorporated.
Cautions and Warnings Warning Only use the batteries, antennas, and chargers provided by QUALCOMM. The use of any other type may be dangerous. Warning Allow only authorized personnel to service the phone and its accessories. Unauthorized service can invalidate the warranty. Caution Any changes or modifications to this equipment not expressly approved in this document could void your warranty and your authority to operate this equipment.
iv
Contents Getting Started ..........................................................................................1 Understanding your phone ...................................................................1 Contacting customer service .................................................................1 Solving problems ....................................................................................1 Understanding this guide ......................................................................
Messages Menu ........................................................................................23 Voice messages .....................................................................................23 Text messages ......................................................................................24 Features Menu .........................................................................................27 Key Guard .....................................................................................
Aircraft .................................................................................................59 Blasting areas ......................................................................................59 Potentially explosive atmospheres .....................................................59 For vehicles equipped with an air bag ................................................59 Accessories ................................................................................................61 Battery .
viii
It is very important that you read this section because your tri-mode phone is unique – it combines satellite technology and cellular technology in one phone. For more detailed information on usage, refer to the other sections in this guide. If you need further assistance, see Solving problems, page 1.
Preparing for satellite calls ■ ■ ■ ■ If the security module is not properly installed, you can only make calls to emergency numbers and you cannot receive calls. Your satellite service provider installs and maintains the security module (see Security module, page 8, for more information). Charge and properly install the battery. See Battery Care and Maintenance, page 53. Rotate the Globalstar satellite antenna located on the back of the phone (see Phone features and keypad, page 5).
Position yourself outdoors so that your view of the sky is clear to prevent dropped calls. For best performance, move away from tall obstacles such as buildings or trees. If you have a clear view of the sky, the satellites will have a clear view of you and the phone. The phone will not operate inside a building nor a vehicle unless you are using the car kit. Correct Incorrect Incorrect Incorrect without car kit Making satellite calls 1. 2. 3. 4.
Making cellular calls 1. 2. 3. Press and hold Pwr to turn your phone on. If your phone is in Globalstar satellite mode, select digital or analog mode by pressing and holding * to display the mode menu. Then press either def 3 for Digital or ghi 4 for Analog. Fully extend the cellular antenna.
Phone Basics Learn about these topics in this section: ■ ■ ■ ■ Phone features and keypad Display indicators Security module Antenna basics Phone Basics Phone features and keypad 13 1 2 21 GLOBALSTAR 3 4 14 i 15 | menu | | book | 5 6 7 8 9 Info 11 End 1 abc 2 def 4 jkl 5 mno 6 pqrs 7 tuv 8 * + 0 ghi 10 Clr Send 23 3 9 wxyz # Pwr 12 18 19 20 1. 2. 3. 22 16 17 21 Light indicator – Flashes when turning phone on or when receiving incoming calls.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 6 SMART KEY options – Select the option on the screen by pressing the SMART KEY below it. SMART KEYS – Press the SMART KEY to select the appropriate option on the screen. Information key – Insert pauses and hyphens. Additional help is available if i displays on the screen. Displays phone number and current service provider. Send key – Originate or answer a call. Also used for features such as call waiting.
Display indicators The indicators on the screen show the status of the phone and the battery charge level at a quick glance. Looking for i Globalstar Service... | menu | | book | D Phone Basics Phone operating in Globalstar satellite mode Phone operating in digital mode Phone operating in analog mode if or D do not display Signal strength ranging from a strong signal (four lines) to an extremely weak signal (one line) Call in progress No service available.
Security module The security module activates your phone when in Globalstar satellite mode. It is located on the lower left side of the front of the phone. The security module that comes with your phone works only with that phone and is not interchangeable. Caution Do not remove the security module. When in Globalstar satellite mode, the security module must be properly installed to make or receive calls. If it is not properly installed, you can only make calls to emergency numbers.
Calling Basics Learn about these topics in this section: ■ ■ ■ ■ ■ Turning the phone on and off Standby and power save modes Entering numbers Making emergency calls, redialing, and muting Possible service provider services (international dialing, call waiting, three-way calling, and caller ID) Turning the phone on 1. 2. Make sure that the battery is charged and properly installed (see Battery chargers, page 54, and Battery replacement, page 55).
Power save mode Power save mode maximizes the battery life. Your phone switches to power save mode after repeated attempts to find service. The following message displays when service is not found and your phone is in power save mode: Service Not Found, press key to retry | menu | | book | To return to standby mode, press any key. See Deep Sleep, page 44, for more information on setting power save durations. Entering numbers To enter numbers 1. 2. From standby mode, enter the numbers.
Redialing a call To redial the last outgoing number ■ Press SEND . Muting a call While you are on a call, you can mute the microphone so that the caller cannot hear you. To turn mute on ■ Press mute. The word “Mute” replaces the word “Time” on the screen until you end the call or turn mute off. To turn mute off ■ mute. The word “Time” replaces the word “Mute” on the Calling Basics Press screen.
Caller ID Caller ID displays an incoming call’s phone number on the screen, if available. If the phone number of the caller matches one stored in your phone book, the name also displays with the number. For more information on caller ID, contact your satellite or cellular service provider.
Menu Basics Learn how to access and navigate through the phone menus in this section. The phone menus are designed so that you can easily access and navigate through them. The following road map shows the various menus on the main menu, which is accessed by pressing menu.
Accessing main menu 1. 2. Turn the phone on. The phone is now in standby mode (see Standby mode, page 9). Press menu and the first three main menu items display. If scroll arrows display on the screen, you can scroll between screens to access additional menu options. Each main menu item is explained in sequential order in separate sections of this guide.
Phone Book Menu 1 Phone Book | view | | find | 1 Name | options | 2 Phone Number 3 Location 1 Edit 2 Erase 3 Secret 4 View Number 5 Prepend 6 Send Tones Learn about using the phone book, entering letters and other characters, entering pauses, speed dialing, and one-touch dialing in this section. Entering letters and other characters To enter letters and other characters 1. Press a key repeatedly to display the letters in uppercase, then lowercase, and finally the number.
Entering pauses When using automated phone services, such as voice mail or online banking, you can use pauses when entering a series of numbers. You can also enter pauses manually, or you can save pauses in phone book entries. Each pause counts as one character. There are two types of pauses: ■ ■ Hard Pause – Stops until you press resume to send the rest of the number sequence. Timed Pause – Stops for two seconds and then resumes automatically.
2. 3. 4. Press save. Enter a name and press ok. Enter a location number: ■ If the phone book is not full: ❑ Press ok to automatically accept the next empty location. ❑ Press next to scroll to an empty location. ❑ Enter a location number of your choice. ❑ Scroll to empty locations. ■ If the phone book is full, enter a location number that you want to reuse and replace with the new information. You will lose the old information.
6. 7. Edit the name or phone number, or do one of the following to edit a location number: ■ Enter a new location number. ■ Press next or use the scroll keys to scroll to a new location number. Press ok. Erasing entries 1. 2. 3. 4. 5. From standby mode, press Find the entry and press Press options. Press abc 2 to Erase. Press ok. book. view. Making entries secret To prevent a phone number from displaying on the screen, you can make the entry “Secret.” To make an entry secret or nonsecret 1. 2. 3. 4.
Prepending numbers You can permanently prepend (add) numbers, such as an area code or country code, at the beginning of a phone number in an existing phone book entry. To prepend (add) numbers 1. 2. 3. 4. 5. 6. From standby mode, press book. Find the entry and press view. Press options. Press jkl 5 for Prepend. The phone number displays. Enter the numbers. Press save.
To speed dial a phone number 1. 2. Enter the location number. Press SEND . One-touch dialing If you set one-touch dial to “on,” you can dial any of the 99 location numbers without pressing SEND . To set one-touch dial, see One-Touch Dial, page 43. To one-touch dial a phone number 1. 2. 20 Set one-touch dial to “on” (see One-Touch Dial, page 43). Press and hold the last digit of the location number. For example: ■ Press and hold def 3 for location number 3.
2 Call Hist | view | You can access a call history list of the last ten incoming or outgoing satellite or cellular calls (numbered 0 to 9) and view details about each call type: ■ Called By Incoming calls, if caller ID is available (see Caller ID, page 12) ■ Call To Outgoing calls ■ Added Scratchpad entries (see Scratchpad, page 27) ■ Missed Unanswered incoming calls, if caller ID is available ■ Caller ID Caller ID information received ■ Call Waiting Call-waiting information received durin
Viewing call history details 1. 2. Scroll to select a call on the list. Press view. CALL TO John 987-6543 2 | options | 3. 22 Press options and do one of the following: ■ Save the number in your phone book. ■ Access call time and call duration. ■ Access call status information.
Messages Menu 3 Messages | text | | voice | Learn about retrieving SMS (short message service) messages in this section. SMS includes both text and voice mail notification messages. Contact your satellite or cellular service providers for information regarding the availability of text and voice mail notifications. When you read a message, new messages are accessed before old messages.
3. Do one of the following: ■ Press next to read the next voice mail notification. ■ Press view to display more detail, if available, which automatically scrolls on the screen and pauses so you can read it. Press a scroll key to manually scroll. To call your voice mail system 1. 2. 3. 4. 5. 6. 7. 8. Press . Press voice. Press next to find the voice mail notification you want. Press view. Press SEND . The phone number for the voice mail system displays, if available. Go to Step 6.
3. Do one of the following: ■ Press next to read the next message. ■ Press view to display more detail, if available, which automatically scrolls on the screen and pauses so you can read it. Press a scroll key to manually scroll. To call back numbers in text messages 7. Press . Press text. Press next to find the message you want. Press view. Press SEND . The call back number displays, if available. If necessary, prepend (add) digits before the call back number.
To avoid running out of memory ■ Erase locked or unlocked messages that you no longer need. When the phone is out of memory and all text messages are locked, it no longer accepts new messages and this message displays: The network may try to deliver lost messages later. Locking and unlocking text messages To prevent messages from being automatically deleted if the phone is out of memory, you can lock them. You can manually erase a text message even if it is locked. To lock or unlock text messages 1. 2.
Features Menu 4 Features 1 Key Guard 2 Scratchpad Key Guard The key guard locks the phone keys to prevent accidental use. If you receive an incoming call when the key guard is on, you can still answer the call. To turn the key guard on ■ Shortcut: From standby mode, press and hold and “KeyGuard On” displays. END . The lock indicator To turn the key guard off ■ Press 1 abc 2 def 3 . Scratchpad To access the scratchpad 1. 2. 3. 4. 5. 6. From standby mode, press menu. ghi 4 Press for Features.
28
Call Info Menu 5 Call Info 1 Last Call 2 Home Calls 3 Roam Calls 4 Recent Calls 5 All Calls The Call Info menu contains counters that allow you to track the number of calls and airtime for billing purposes. Last Call Last Call displays the duration of the last call in minutes and seconds. If Call History is empty, “None” displays on the screen. To display last call information 1. 2. 3. 4. From standby mode, press Press jkl 5 for Call Info. 1 for Last Call. Press Press ok. menu.
Recent Calls Recent Calls displays the number and duration of calls made or received since resetting the counter. You can reset this counter to zero (see Resetting call counters, page 30). To display recent calls information 1. 2. 3. 4. From standby mode, press menu. Press jkl 5 for Call Info. Press ghi 4 for RecentCall. Press ok to return to standby mode. All Calls All Calls displays the number and duration of all calls for the lifetime of your phone. You cannot reset this counter.
Security Menu 6 Security 1 Lock Phone 2 Restrict Phone 3 Enter New Code 4 Enter Priority Numbers 5 Erase Call History 6 Erase Phone Book 7 Erase SMS 8 Reset Preferences 9 Enter PIN When you access the Security menu for the first time, enter the lock code supplied by your satellite or cellular service provider. Note Change the lock code immediately after receiving the phone. See Entering a new lock code, page 32. Subsequently, each time you access the Security menu, you are prompted for your new lock code.
Restricting the phone When you restrict your phone, you can only make calls to emergency numbers, priority numbers, and phone book locations 1 to 9. You cannot make changes to the phone book when you restrict your phone. To restrict the phone 1. 2. 3. 4. From standby mode, press menu. Press mno 6 for Security and enter your lock code. Press abc 2 for Restricted. Scroll to select one of these options: ■ Yes – Make calls to emergency numbers, priority numbers, and phone book locations 1 to 9 only.
Erasing call history list You can erase the entire call history list. 1. 2. 3. 4. 5. From standby mode, press menu. Press mno 6 for Security and enter your lock code. Press jkl 5 for Erase Call. Press ok. Press ok to erase the entire call history list, or press do not want to erase it. END if you Erasing phone book entries You can erase all entries in the phone book. 1. 2. 3. 4. 5. From standby mode, press menu. Press mno 6 for Security and enter your lock code. Press mno 6 for Erase Book. Press ok.
Resetting preferences You can reset all preferences to the original settings (defaults) that were previously set by your satellite or cellular service provider. These preferences include those described in Preferences Menu, page 35, with these exceptions: ■ ■ ■ ■ The banner is not reset. The Service Provider Preferred and Prohibited Lists are deleted (see Service Provider Select, page 46). The lock code is not reset. The phone book, call history, or SMS messages are not erased. To reset preferences 1. 2.
7 Preferences 1 Sounds 2 Display 3 Alerts 4 Calling 1 Ringer Type 2 Ringer Volume 3 Earpiece Volume 4 Key Beep Sound 5 Key Beep Volume 6 Key Beep Length 7 Mute Stereo 1 Backlight 2 Banner 3 Show Time 4 Auto Hyphen 5 Globalstar Time Zone 1 Fade 2 Minute 3 Service Change 4 New Message 1 Auto Answer 2 Auto Redial 3 One-Touch Dial 4 Any-Key Answer 5 Deep Sleep 6 Send PIN Sounds You can set ringer type, ringer volume, earpiece volume, key beep sound, key beep volume, key beep length, and mute stereo.
❑ ❑ Scroll to select the volume level from 1 (lowest) to 9 (highest) or Silent to turn the ringer off. While in standby mode, “-Ringer Off-” displays in place of the date. Press ok. To silence the ringer when receiving a call ■ Press END . Earpiece Volume You can adjust the earpiece volume to one that is comfortable for you. You can adjust the volume while on a call or from standby mode. To adjust the earpiece volume ■ ■ While on a call, press the volume buttons. From standby mode: a. Press menu. b.
You can set the length of the key beep, the sound you hear when pressing the keys. The normal key beep is short and fixed in length. The long key beep sounds as long as you press a key. Some services or devices, such as answering machines, may require the long key beep because you must press and hold a key to send a tone. Using the normal key beep is recommended.
Backlight You can set the screen and keypad backlighting to maximize battery life. To set the backlight 1. 2. 3. 4. 5. 6. From standby mode, press menu. Press pqrs 7 for Preferences. Press abc 2 for Display. 1 for Backlight. Press Scroll to select one of the following: ■ Always Off – The backlight is always off, which significantly increases battery life. ■ 7 Seconds – Turns the backlight off 7 seconds after the last key press. ■ 15 Seconds – Turns the backlight off 15 seconds after the last key press.
1. 2. 3. 4. 5. 6. From standby mode, press menu. Press pqrs 7 for Preferences. Press abc 2 for Display. Press def 3 for Show Time. Scroll to select one of the following: ■ 12 hour – Time displays in 12-hour format ■ 24 hour – Time displays in 24-hour format ■ UTC (universal time coordinated) – 24-hour time scale maintained by the Bureau International del I’Heure ■ Off – Time does not display Press ok. Auto Hyphen You can use this feature to automatically insert hyphens when you enter phone numbers.
Globalstar Time Zone When in Globalstar satellite mode, this feature allows you to select the display of a different time zone instead of UTC (universal time coordinated) time. The time zone remains selected until you change it and is only valid for Globalstar satellite mode. The time zones for selection include the following: European U.S.
Preferences Menu To select a different time zone 1. 2. 3. 4. 5. 6. From standby mode, press menu. Press pqrs 7 for Preferences. Press abc 2 for Display. Press jkl 5 for G* TimeZone. Scroll to select the appropriate time zone. Press ok. Alerts For your convenience, you can set alerts that sound a tone. Fade The fade alert sounds a tone when any network drops a call. To set the fade alert 1. 2. 3. 4. 5. 6. From standby mode, press Press pqrs 7 for Preferences. Press def 3 for Alerts. 1 for Fade.
New Message The new message alert sounds a tone when you receive a new text message or voice mail notification. To set the new message alert 1. 2. 3. 4. 5. 6. From standby mode, press menu. pqrs 7 Press for Preferences. Press def 3 for Alerts. Press ghi 4 for New Message.
You can use this feature to automatically redial a busy number. While the phone is in standby mode, the phone automatically redials five times at intervals you choose. If the current service is changed for any reason, auto redial stops for that call. To set auto redial 1. 2. 3. 4. 5. 6. From standby mode, press menu. Press pqrs 7 for Preferences. Press ghi 4 for Calling. Press abc 2 for Auto Redial.
Deep Sleep When your phone is in power save mode, you can set the deep sleep duration to maximize battery life. To set deep sleep 1. 2. 3. 4. 5. From standby mode, press menu. pqrs 7 Press for Preferences. Press ghi 4 for Calling. Press jkl 5 for Deep Sleep.
System Menu 8 System 1 Status 2 Force System Reacquisition 3 Version 4 Service Provider Select 1 Known List 2 Preferred List 3 Prohibited List 4 Force Service 8 Auto Mode 9 NAM Select Provider Selection System Menu 5 Service Provider 6 Territory 7 Manual Mode 1 Auto Mode 2 Globalstar 3 Digital 4 Analog 1 Auto NAM 2 Set NAM 3 Set System Status This feature provides status for the state of the phone’s Globalstar satellite antenna, car kit, security module, battery, memory, lock, and self-test: ■ J L ■
Self-test – If J displays, the phone has made a successful self-test. If L displays, contact your satellite or cellular service provider. Press Clr or END . ■ 4. Force System Reacquisition With this feature, the phone disconnects and attempts to acquire Globalstar satellite, digital, or analog service, depending on your mode selection (see Manual Mode, page 49, or Auto Mode, page 50). To force the phone to reacquire service 1. 2. 3. 4. From standby mode, press menu. 8 tuv Press for System.
When you look at the Known List, satellite service providers you have placed on other lists display as follows: ■ ■ ■ Satellite service providers placed on the Preferred List are highlighted. Satellite service providers placed on the Prohibited List are crossed out. Satellite service providers placed on both the Preferred and Prohibited Lists are highlighted and crossed out.
6. 7. 8. 9. Press edit. 1 for Preferred or abc 2 for Prohibited. Press Press ok. Reregister your phone (see Registering phone, page 47). Editing lists To edit (reorder or delete) from the Preferred List 1. 2. 3. 4. 5. 6. 7. 8. 9. From standby mode, press menu. Press tuv 8 for System. Press ghi 4 for SP (service provider) Select. Press abc 2 for Prefr List. Scroll to select a satellite service provider. Press edit.
To force service provider selection 1. 2. 3. 4. 5. From standby mode, press menu. Press tuv 8 for System. Press ghi 4 for SP (service provider) Select. Press ghi 4 for Force SPS (service provider selection). Press ok. Service Provider System Menu To display the current service provider’s name 1. 2. 3. 4. From standby mode, press Press tuv 8 for System. Press jkl 5 for SrvcPrvder. Press Clr or END . menu.
To manually select a mode 1. Shortcut: From standby mode, press and hold * displays: 1 2 3 4 2. . The following Auto Mode Globalstar Digital Analog Press: ■ ■ ■ ■ 1 to select Auto Mode. The message “Initiate Automatic System Acquisition” displays. abc 2 for Globalstar satellite mode. The message “Initiate Globalstar System Acquisition” displays. def 3 for Digital mode. The message “Initiate Digital System Acquisition” displays. ghi 4 for Analog mode.
5. 6. If the Cell Pref menu displays, scroll to select one of the following: ■ Analg Only – Prefer analog service only ■ Digtl Only – Prefer digital service only ■ Digtl Pref – Prefer digital service over analog ■ Analg Pref – Prefer analog service over digital Press ok. NAM Select You can select the NAM you want to use by accessing these options: ■ ■ ■ Auto NAM – Automatically switches NAMs, if appropriate, during system searches to look for home area service. Set NAM – Manually sets the NAM.
5.
Battery Care and Maintenance Learn about battery care, battery charging, and battery removal and replacement in this section. Battery The phone comes with a rechargeable battery that is located on the back of the phone: The following is typical battery performance: Talk Time Standby Time Globalstar satellite 3.5 hours 9 hours Digital 4.5 hours 72 hours Analog 2.
■ ■ ■ ■ ■ ■ ■ To prevent damage, do not charge the battery in temperatures less than +32 °F (0°C) or greater than +104 °F (+40 °C). Do not use the battery in temperatures less than –4 °F (–20 °C) or greater than +140 °F (+60 °C). Do not use the battery charger in direct sunlight or in places with excessive humidity, such as a bathroom. Keep the metal contacts at the top end of the battery clean. Never dispose of the battery in a fire. Do not try to disassemble or short circuit the battery.
Battery removal 1. 2. Turn the power off to avoid losing data. Press and hold the battery release latch in the direction of the arrow to release it from the phone. Battery replacement 1. 2. 2 3 Positioning Tabs 55 Battery Care 3. If a battery is already installed, turn the power off to prevent losing data and then remove the battery. Insert the new replacement battery by lining up the positioning tabs (see arrows) and rotating it into place. Press down on the battery until it locks.
56
Safety Information Learn the safety information for wireless handheld phones in this section. Exposure to radio frequency signals Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones.
Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please: ■ ■ ■ Give full attention to driving – driving safely is your first responsibility; Use hands-free operation, if available; Pull off the road and park before making or answering a call if driving conditions so require. Electronic devices Most modern electronic equipment is shielded from RF signals.
Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted facilities Turn your phone OFF in any facility where posted notices so require. Aircraft FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft.
60
Accessories The optional accessories described in this section are available from your satellite or cellular service provider. Caution Allow only authorized personnel to service the accessories. Unauthorized service can invalidate the warranty. Battery An extra battery allows you to have a charged battery available at all times. Leather case A leather case with a wrist strap protects your phone and provides carrying convenience.
Hands-free car kit With the QUALCOMM Globalstar Hands-Free Car Kit, you can adapt your phone for hands-free operation in your vehicle. For more information, see the QUALCOMM Globalstar GCK-1400 Hands-Free Car Kit Installation/ User Guide. Caution Allow only authorized personnel to install or service the car kit. Faulty installation or service can be dangerous and can invalidate the warranty.
If you have a problem with your phone that you cannot solve by following these troubleshooting tips, contact your satellite or cellular service provider. (You may have different service providers for Globalstar satellite service and cellular service.) Problem Solution Turning the phone on ■ ■ ■ Charging the battery ■ ■ ■ ■ ■ Battery draining quickly ■ ■ ■ ■ Hold Pwr for more than one second. Check the battery installation. Recharge or replace the battery. Install only QUALCOMM batteries.
Problem Solution Making calls ■ ■ ■ Rotate or fully extend the appropriate antenna. In Globalstar satellite mode, be sure the satellite antenna has a clear view of the sky. Check that you selected the correct service mode: Globalstar: Press and hold * to display the mode menu, and press abc 2 for Globalstar. Cellular: Press and hold * to display the mode menu, and press def 3 for Digital or ghi 4 for Analog.
Solution Receiving calls ■ ■ ■ ■ ■ Check that the phone is turned on. Check that the ringer is loud enough. Rotate or fully extend the appropriate antenna. In Globalstar satellite mode, be sure that the satellite antenna has a clear view of the sky. Check that you selected the correct service mode: Globalstar: Press and hold * to display the mode menu, and press abc 2 for Globalstar. Cellular: Press and hold * to display the mode menu, and press def 3 for Digital or ghi 4 for Analog.
66
Index A AC wall charger 61 accessories 61 air bag safety 59 alerts 41 fade 41 minute 41 new message 42 service change 41 all calls 30 analog mode indicator 7 answering calls 4 antenna 8 cellular 4 safety 57 satellite 2, 5 any-key answer 43 auto answer 42 auto hyphen 39 pauses 16 auto mode 49, 50 auto NAM 51 auto redial 43 B backlight, settings 38 banner 38 battery charge indicator 53 charge time 54 charger indicator 7 chargers 54 charging 53 decrease life 38 guidelines 53 increase life 38 low charge 54 remo
end key 14 defined 6 ending calls 4 entering hyphens 39 letters 15 numbers 10 pauses 16 priority numbers 32 punctuation 15 spaces 15 erasing all phone book entries 33 all SMS messages 33 call history list 33 phone book entries 18 F fade alert 41 features menu 27 key guard 27 scratchpad 27 finding phone book entries 17 force service provider selection 48 G Globalstar satellite mode 1, 3, 49, 50 Globalstar time zone 40, 41 H hands-free car kit 62 hard pauses 16 hearing aids 58 home calls 29 hyphens entering a
minute alert 41 mode cellular 1, 3, 49, 50 power save 10 satellite 1, 3, 49, 50 standby 9 mute phone 11 mute stereo 37 N NAM Select setting auto NAM 51 setting NAM 51 setting system 51 navigating menus 14 new message alert 42 no service indicator 7 numbers deleting 10 editing 10 entering 10 O one-touch dial setting 43 using 20 one-touch dialing setting 43 P pacemakers 58 pauses 16 entering 16 PC data cable 61 phone book editing entries 17 erasing all entries 33 erasing entries 18 finding entries 17 nonsecre
satellite calls making 3 preparing for 2 satellite mode 1, 3, 49, 50 satellite mode indicator 7 saving menu changes 14 scratchpad 27 scroll arrows 7 scroll keys 1, 6 secret entries 18 security menu 31 enter PIN 34 erase call history 33 erase phone book 33 erase SMS messages 33 lock phone 31 new code 32 priority numbers 32 resetting preferences 33, 34 restricted 32 unlock phone 31 security module 2, 8 sending PIN 44 sending tones 19 manually 19 phone book 19 scratchpad 27 service alert 41 service provider ac
