QCNFA524 Product name: Wi-Fi 6 + BT 5.1 M.
Revision History Revision Description of Changes Nov 2019 Initial Release
Introduction The QCNFA524 module is designed to support Wi-Fi 6 and Bluetooth applications that support 2.4/5GHz, 2 streams 802.11a/b/g/n/ac/ax, and Bluetooth 5.1. The card uses the Microsoft Windows Client Utility (ACU) which is a user-mode utility designed to edit and add profiles for selected network interface adapters. This module requires professional installation and can be only assembled in a Microsoft Windows laptop/tablet by system manufacture.
The wireless network adapter works in either infrastructure mode (which uses an access point) or ad hoc mode (a group of stations participating in the wireless LAN). Create or Modify a Configuration Profile To add a new configuration profile, click New on the Profile Management tab. To modify a configuration profile, select the configuration from the Profile list and click the Modify button. The Profile Management dialog box displays the General tab. In profile management: Edit the General tab.
1. Highlight a profile in the Auto Selected Profiles box. 2. Click Move Up, Move Down, or Remove as appropriate. The first profile in the Auto Selected Profiles box has highest priority, and the last profile has lowest priority. 3. Click OK. 4. Check the Auto Select Profiles box. 5. Save the modified configuration file. When auto profile selection is enabled by checking Auto Select Profiles on the Profile Management tab, the adapter scans for an available network.
Scan Available Networks Click the Scan button on the Profile Management tab to scan for available infrastructure and ad hoc networks. On this list, click Refresh to refresh the list at any time. Connecting to a different network Highlight a network name and click the Activate button to connect an available network. If no configuration profile exists for that network, the Profile Management window opens to the General tab.
Tray Icon The tray icon appears at the bottom of the screen, and shows the signal strength using colors and the received signal strength indication (RSSI). Hold the mouse cursor over the tray icon to display the current configuration profile name and association, as well as transmit and receive speed and the wireless adapter name and IP address. Right-click on the tray icon to: Help Open the online help. Open Client Launch the Client Utility (ACU).
The colors are defined as follows: Color Quality RSSI* Green Green Excellent Good 20 dB + 10-20 dB + Yellow Poor 5-10 dB Red Poor < 5 dB Gray No Connection No Connection *Received signal strength indication RSSI. Displayed in dB or percentage. Enable or disable the tray icon in the Action menu.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.
Approved antenna(s) list Antenna Brand Model No. 1 WNC 81.EBJ15.005 2 WNC 81.EBJ15.005 Antenna Net gain 3.00 2.56 4.76 4.76 3.62 3.08 3.31 2.42 Frequency range (GHz) 2.4~2.4835 5.15~5.35 5.47~5.725 5.725~5.850 2.4~2.4835 5.15~5.35 5.47~5.725 5.725~5.850 Cable Loss (dBi) 1.15 1.70 1.74 1.79 1.15 1.70 1.74 1.79 Cable Length (mm) Ant. Type Connector Type PIFA i-pex(MHF2) 300 PIFA i-pex(MHF2) 300 2.
Module. The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules.
location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; (iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.
2 WNC 81.EBJ15.005 4.76 4.76 3.62 3.08 3.31 2.42 5.47~5.725 5.725~5.850 2.4~2.4835 5.15~5.35 5.47~5.725 5.725~5.850 1.74 1.79 1.15 1.70 1.74 1.79 PIFA i-pex(MHF2) 300 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅 自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象 時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之 干擾。 1. 使用此產品時應避免影響附近雷達系統之操作。 2. 高增益指向性天線只得應用於固定式點對點系統。 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。 2.