QSIP7180/QSIP7180P Module Integrator Instruction 80-11139-4 Rev. AD September 22, 2020 All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.
Revision history 80-11139-4 Rev. AD Revision Date Description AA July 2020 AB September 2020 Updated AC September 2020 Updated AD September 2020 Updated Initial release MAY CONTAIN U.S.
Contents 1 Introduction ............................................................................................................................................... 6 2 Product Overview ...................................................................................................................................... 7 3 Available Global Modular Approvals from Qualcomm ..............................................................................
QSIP7180/QSIP7180P Module Integrator Instruction Contents 12.3 European Community (RED) Declaration of Conformity for System ........................................ 24 12.4 Brazil user manual wording ...................................................................................................... 24 12.5 Taiwan user manual wording ................................................................................................... 25 12.6 Japan user manual wording......................................
Tables Table 4-1 47CFR Rules Parts Addressed in Modular Certification .............................................................. 10 Table 7-1 Allowed maximum gain (dBi), including antenna cable loss ....................................................... 13 80-11139-4 Rev. AD MAY CONTAIN U.S.
1 Introduction This document provides information regulatory information and process required for a host product that integrates the QSIP7180 module. It addresses both using the QSIP7180 module in a host product and obtaining certifications/authorizations for the specific markets. Confidential Design Guidelines are available to QSIP7180 customers via the Qualcomm® CreatePoint system. Please contact your Qualcomm account manager and /or customer engineer representative to request support. 1.
2 Product Overview The highly integrated QSIP modules provide the fundamental building blocks for the notebook compute in addition to a 3G/4G/Wi-Fi and Bluetooth radios. The QSIP7180 has two baseline regulatory certification variants: ■ Windows or Chromebook for WWAN + Wi-Fi/BT □ Regulatory Model: QSIP7180 □ FCC ID:J9CQSIP7180 ■ Windows or Chromebook Wi-Fi / BT only □ Regulatory Model: QSIP7180P □ FCC ID:J9CQSIP7180P NOTE: OEM/ODM Integrator must complete a FCC ID change per according FCC 47 CFR § 2.
3 Available Global Modular Approvals from Qualcomm Module host certification is limited to those countries in which Qualcomm has obtained radio modular approvals. For devices that require RF exposure assessment at the host level due to portable user conditions, a host level assessment is required along with completion of applicable regulatory certification process for the host device. To access the current list of certified countries, please review documentation in the Qualcomm CreatePoint system.
4 Integrated Product Test and Certification Requirements Integrators must adhere to test guidance provided in FCC KDB 996369 D04 available at this website: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=44637 1. The module has been approved for the rule parts defined in Table 4-1. Host device must be tested for Part15B compliance. 2. Radiated emissions testing should be tested per KDB 996369 with all transmitters active and transmitting at max transmit power.
QSIP7180/QSIP7180P Module Integrator Instruction Integrated Product Test and Certification Requirements Table 4-1 47CFR Rules Parts Addressed in Modular Certification Band Applicable FCC Rule Part Band 5 47CFR47 Part 22 Band 2 47CFR47 Part 24 Band 46 47CFR47 Part 15 Subpart E Other 3GPP Bands 47CFR47 Part 27 Wi-Fi 2.4 GHz 47CFR47 Part 15.247 Bluetooth 2.4 GHz 47CFR47 Part 15.247 Wi-Fi 5GHz 47CFR47 Part 15 Subpart E Receive Mode 47CFR47 Part 15 Subpart B Test Standards ANSI C63.
5 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator Global modular certifications only apply to radio conformance for the Module. ■ The OEM integrator is responsible for any additional system-level EMI/EMC and product safety testing and certifications that apply in the U.S. and other countries where the host system is containing the Module. ■ These system-level EMC tests are done with the Module installed and included in the scope of the submission.
6 Compliant/Allowable Tx Power File For unlicensed Wi-Fi and Bluetooth. Transmit power settings that are programmed in the boarddata file and Non-ViolentNV file (NVM file) in the software. The software image is installed at the time of manufacture of the system. WWAN calibration items are stored in the Nonvolatile (“NV”) memory and is calibrated during module manufacturing process. The module can also be configured to modified transmit power for RF Exposure compliance.
7 Allowable Antennas to Use with the Radio Module The module is certified for use only with certain antennas described in this chapter. ■ For 2.4GHz/5GHz unlicensed band: Allowed antenna type: PIFA Table 7-1 Allowed maximum gain (dBi), including antenna cable loss Band Antenna Gain (dBi) 2.4 GHz 3.62 5.150-5.350 GHz 3.08 5.470-5.850 GHz 4.
QSIP7180/QSIP7180P Module Integrator Instruction Allowable Antennas to Use with the Radio Module FDD 19: JP 3 FDD 20: EU 1.7 FDD 21 FDD 22: FDD 23: FDD 24: FDD 25: US 5.1 FDD 26: US, JP 2.1 3 FDD 27: FDD 28: EU, JP, TW 0.9 0.9 3 FDD 29: FDD 30: US 0 FDD 31: FDD 66: US 5.9 FDD 71: US 1.1 TDD 33: TDD 34: EU 3.8 TDD 35: TDD 36: TDD 37: TDD 38: US, EU, TW 5.2 5.2 5.2 TDD 39: JP 4 TDD 40: EU TDD 41: US, JP, TW 5.5 5.4 5.
QSIP7180/QSIP7180P Module Integrator Instruction CAUTION: Allowable Antennas to Use with the Radio Module Use of other antenna types or the same type of antenna but with higher gain than listed in Table 7-1 and Table 7-2 is not allowed without additional testing and appropriate FCC approval. See more detail in Antenna changes in FCC KDB 178919 Permissive Change Policy.
8 Antenna Placement Inside the Host System and RF Exposure The FCC and regulatory bodies of other countries impose strict conditions and limitations on the RF exposure levels of end products.
9 Simultaneous Transmission with Other Integrated or Plug-In Radios The FCC imposes conditions and limitations when additional radio(s) are co-located in the same host system as the Qualcomm Module with capability to transmit simultaneously.
10 Required Labeling on the Outside of the Host 10.1 FCC The FCC requires a label on the outside of the host system visible to the end user. Example wording is: Contains: FCC ID: XXX-XXXXXXX (Replace X’s with actual IDs in Section 2) The FCC requires a logo signifying emissions compliance on the outside of the host system. Additional options are available for placement of the FCC label on the host. Refer to the FCC Knowledge Database KDB 784748 found at https://apps.fcc.gov/oetcf/kdb/index.cfm. 10.
QSIP7180/QSIP7180P Module Integrator Instruction NOTE: Required Labeling on the Outside of the Host The Integrator is expected to translate the text in this Section into the appropriate local languages for the European countries in which the product will be marketed or sold. AT BE BG CZ DK EE FR DE IS IE IT EL CY LV LI LT LU HU MT NL NO PL PT RO SI FI CH UK HR SE ES SK TR The full text of the RED is located at: http://eur-lex.europa.
QSIP7180/QSIP7180P Module Integrator Instruction Required Labeling on the Outside of the Host 10.4 Other countries Please refer to Label Guidance DCN: 80-11139-9 (in the Qualcomm CreatePoint System) for complete instructions. 80-11139-4 Rev. AD MAY CONTAIN U.S.
11 Required Labeling on the Module 11.1 FCC labeling on the Module The Integrator must ensure that the FCC ID (as indicated in Section 2) is presented on the Module along with other country certification numbers and logos as described in this section. NOTE: The Module ODM should ensure FCC ID is permanently presented on the module at the time of the Module manufacturing.
12 Required Regulatory Wording for User Manual/Installation Manual The integrator must include text in the user manual meeting the regulators requirements. The text in the following sections or similar wording should be used. NOTE: Text in red font must be replaced. 12.1 FCC compliance information FCC compliance information This device complies with Part 15 of the FCC Rules.
QSIP7180/QSIP7180P Module Integrator Instruction Required Regulatory Wording for User Manual/Installation Manual RF Exposure Statement Radiation Exposure Statement The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual.
QSIP7180/QSIP7180P Module Integrator Instruction Required Regulatory Wording for User Manual/Installation Manual Latviski [Latvian] Ar šo [COMPANY NAME] deklarē, ka Radiolan atbilst Direktīvas 2014/53/EU būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo [COMPANY NAME] deklaruoja, kad šis Radiolan atitinka esminius reikalavimus ir kitas 2014/53/EU Direktyvos nuostatas.
QSIP7180/QSIP7180P Module Integrator Instruction Required Regulatory Wording for User Manual/Installation Manual User manual statement: Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. 12.
QSIP7180/QSIP7180P Module Integrator Instruction Required Regulatory Wording for User Manual/Installation Manual 12.6 Japan user manual wording Applicable for both QSIP7180 and QSIP7180P. It is required to have 5GHz W52, W53 band indoor use warning provide in user manual: 5GHz band (W52,W53): Indoor use only (except communicate to high power radio) 5GHz 帯(W52, W53)は屋内利用に限る (高出力システムと通信する場合を除く) 12.7 India user manual wording No requirement to reference regulatory language in the user manual.
