User Instructions

80-11139-4 Rev. AD MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 21
11 Required Labeling on the Module
11.1 FCC labeling on the Module
The Integrator must ensure that the FCC ID (as indicated in Section 2) is presented on the
Module along with other country certification numbers and logos as described in this section.
NOTE: The Module ODM should ensure FCC ID is permanently presented on the module at the time of
the Module manufacturing. However, the PCOEM must ensure the Module label is complete,
correct, and applicable for all countries where the host system will be imported, marketed, or sold.
NOTE: QSIP7180/QSIP7180P labels must be etched into the lid and the lid installation must follow
specific guidelines.
11.2 Rest of the world labeling on the Module
The Integrator must ensure the Module includes a global regulatory label with certification
numbers and logos for all target countries.
■ The system integrator is responsible for confirming the final regulatory label on the radio
Module contains all required certification IDs for all countries in which the system will be
marketed or sold
■ It is recommended that the PCOEM implement a review and sign-off process and change
control process with the Module ODM to ensure the Module label meets the PCOEM
requirements
Contact your Qualcomm account representative with any questions regarding module labeling.