Product Manual

WORK BENCH • GUARDRAIL COMBINATION

PUMP JACK BRACE

PUMP JACK ANCHOR

PUMP JACK

SYSTEMS

Customer Support and Ordering In for ma tion

781-344-1000 • www.qualcraft.com

Workbench and Guardrail

Holder Combo

Model #2204

Substantially cut work time with a

workbench attached to the pump

jack scaffold. Guardrail holder in-

cluded.

Components below can be pur-

chased separately.

Workbench Nose Section

Model #2202

Guardrail Holder

Model #2203

Pump Jack Brace

Model #2201

Provides rigid steel triangular brac-

ing as required by OSHA. Used as

bracing for wood pump jack poles.

(Poles to be constructed in accor-

dance with operating instructions).

Pump Jack Pole Anchor

Model #2210

Pole anchor provides additional

margin of safety and security when

used in accordance with instruc-

tions. Provides a mud sill in loose

soil conditions.

Product Speci cations

Pump Jack & System Components

Model # 2200 2201 2213 2202 2203 2204

Description: Pump Jack Brace H.D. Swivel Brace Work Bench Nose Guard Rail Guard Rail / Work Bench Comb.

Unit Pack: 1 1 1 / Carton 1 1 1

Weight per Pack: 19.4 lbs. 5.2 lbs. 7 lbs. 5 lbs. 5 lbs. 10 lbs.

Cu. Ft. per Pack: 2.55 .61 1.05 .63 .55 1.33

PAGE 1
WORK BENCH • GUARDRAIL COMBINATION PUMP JACK BRACE PUMP JACK ANCHOR PUMP JACK SYSTEMS Workbench and Guardrail Holder Combo Model #2204 Substantially cut work time with a workbench attached to the pump jack scaffold. Guardrail holder included. Components below can be purchased separately. Workbench Nose Section Model #2202 Guardrail Holder Model #2203 Pump Jack Brace Model #2201 Provides rigid steel triangular bracing as required by OSHA. Used as bracing for wood pump jack poles.
PAGE 2
WORK BENCH • GUARDRAIL COMBINATION PUMP JACK BRACE PUMP JACK ANCHOR ROOFING PRODUCTS Model 2201 Triangular Pump Jack Brace Model # 2204 Guardrail Combo USE OF TRIANGULAR PUMP JACK BRACES; Setting the Pump Jack Poles: 1) Space poles uniformly not more than 7 feet on center when using 2 inch thick nominal walk planks, 9 feet on center when using 2 inch undressed lumber or 11 feet on center when using aluminum walk planks.