Manual

Qual-Craft Adjustable Wall
Brace
Model # 2620
For all of you who have nailed a 2 x 4 wall
brace into place, and then bowed it up or
down to plumb the wall, have we got a deal
for you. The Ad just able Wall Brace plumbs
walls with a simple turn or two to move the
top of the wall in or out. When the wall is set
in its ver ti cal position, nail the at tach ment
plates of the Brace onto the  oor and the top
sill plate.
ADJUSTABLE WALL BRACE - PEE VEE
Model #2620, #2610, #2605
CONSTRUCTION
PRODUCTS
Customer Support and Ordering In for ma tion
781-344-1000 • www.qualcraft.com
Product Speci cations
Model # 2620 2605 2610
Description: Adjustable Little Pee-Vee Big Pee-Vee
Wall Brace
Unit Pack: 2 / Carton 6 / Carton 6 / Carton
Weight per Pack: 43 Pounds 87 Pounds 16 Pounds
Cu. Ft. per Pack: .57 cu. ft. .10 cu. ft. .12 cu. ft.
Qual-Craft Pee Vee
Model # 2605 - Little
Model # 2610 - Big
T he adjustable Wall
Brace will position the
top of your walls, but how about the bottom
plate? Tap the sill plate out with a sledge ham-
mer, or climb a ladder to sledge hammer the
plate in? No way! The Qual-Craft Pee-Vee
works on the same principal as the woodsman’s
pee-vee, it uses leverage to get the job done.
The Pee-Vee provides both pushing and pulling
power so you can move the sill plate in or out to
accomplish proper alignment. To use the Pee-
Vee, set the leverage bar into the  oor, and the
jaw into the sill plate. Then move the lever bar in
the appropriate direction to move the sill plate in
or out. So much easier and precise than ham-
mering. The Pee-Vee comes in two sizes to ac-
commodate the jobsite requirements for sill plate
adjustments.
Qual-Craft Pee-Vee…
Whenever you need leverage
to get the job done.