Product Manual

Door Holder
DH1
www.qualcraft.com1-800-231-5647
60 Maple St., P.O. Box 36
Mansfield, MA 02048
!
WARNING
Set-up:
Features:Specifications:
24” wide base, 10” tall vertical support.
All applications of the DH1 must be selected and deemed compatible with all relevant
equipment by a Competent Person. Always take extreme care when operating machine
tools. Never misuse or modify equipment. Never use for purposes of fall protection.
Holds door panels up to 3” thick.
Made from durable, powder-coated steel.
Perfect for holding doors on edge while
routing, planing, and sanding.
Fast to set-up and easy to use.
1) Rotate flat bar stabilizer so it is 90° from base tube; 2) Loosen T-Screw to adjust; 3) Insert door
panel between vertical support; 4) Close vertical support against door panel; 5) Hand-tighten
T-Screw until snug.
Little tool,
BIG help.
Folds flat for compact storage.
85013 (Rev. B)