Owner's manual

Side Wall

Staging Bracket

Model # 2300

This sturdy, steel con struct ed

brack et bolts through walls with

ad just ment for wall thickness.

Supports a 36” plat form con-

struct ed of 2” thick planks. Holds

two work ers plus 75lbs. per 8

foot stag ing, no more than 8 foot

span be tween brack ets. Must use

guardrails when in stalled over 6

feet above ground. Folds for com-

pact storage and trans por ta tion.

Product Speci cations

SIDE WALL STAGING BRACKET

MODEL #2300, #2301

CONSTRUCTION

PRODUCTS

Customer Supprt and Ordering In for ma tion

781-344-1000 • www.qualcraft.com

Model # 2300 2301

Description: Staging Bracket Staging Bracket/Guardrail

Unit Pack: 1 1

Weight per Pack: 10.5 Pounds 7 Pounds

Cu. Ft. per Pack: .31 cu. ft. .31 cu. ft.

Staging Bracket Guard Rail

Model # 2301

You must use guardrails when

in stalling staging over 6 feet above

ground.

PAGE 1
SIDE WALL STAGING BRACKET MODEL #2300, #2301 CONSTRUCTION PRODUCTS Side Wall Staging Bracket Model # 2300 This sturdy, steel constructed bracket bolts through walls with adjustment for wall thickness. Supports a 36” platform constructed of 2” thick planks. Holds two workers plus 75lbs. per 8 foot staging, no more than 8 foot span between brackets. Must use guardrails when installed over 6 feet above ground. Folds for compact storage and transportation.
PAGE 2
CONSTRUCTION PRODUCTS SIDE WALL STAGING BRACKET MODEL #2300, #2301 INSTRUCTIONS FOR INSTALLATION AND USE OF STAGING BRACKET MODEL #2300 CAPACITY: Capacity of the Model #2300 Staging Bracket is two men per staging plus 75 lbs. GENERAL REQUIREMENTS: The brackets may be spaced no more than 8 ft. apart. The platform shall consist of not less than 2 inch x 10-inch planks extending not more than 10 inches or less than 6 inches beyond each staging bracket.
PAGE 3
SIDE WALL STAGING BRACKET CONSTRUCTION PRODUCTS MODEL #2300, #2301 Installing Staging Bracket Guardrail Holder Model # 2301 The Qual-Craft Model # 2301 Staging Bracket Guardrail Holder should be installed prior to mounting the model #2300 Staging Bracket to the work wall. Lay the base of the guardrail holder up under the end of the staging bracket platform so that the guardrail holder is at right angle to the platform arm.