ASSEMBLY INSTRUCTION WF198726AAE WF198727AAE Component Hardware List WF198726AAE No. Parts Description QTY No.
STEP 1 ： 1. Screw four feet into the bottom of about Headboard and footboard, as show in Figure 1 2. Screw Hang Bolts (1) into Headboard (A).Make sure there is enough length of the Hang Bolts (1) for next step as show in Figure 2. 3. Insert Hang Bolts (1) through the hole of Bed Rails (C) as shown in Figure 3. 4. Attach Bed Rail (C) to Headboard (A) using Crescent Spacer (2), and Nut (4). tighten with Wrench(5) as show in Figure 4. Don't tight Nut (4) fully. 5. Repeat the steps 1,2,& 3 for Footboard (B). 6.
STEP 3： 1. Put 10 pieces of Bed Slats (E) on the Bed Rails (C). 2. Install Slat Pack with slats starting and ending flush with the end of the support cleat attached to your bed rails Figure 1. 3. Using Screw driver to tighten 20 Pieces of Wood Screws (11) clockwise as shown. 11 E Flush 11 Figure 1 20 pcs STEP 4： 1. Attach 4 pices of Wheels (9) to the Slats under bed (H) with 16 pieces of Wood Screws (11) as shown. 2. Use Screw driver to tighten to tighten Wood Screws (11) clockwise as shown.
STEP 6 ： 1. Put Slats of under bed (H) on the Bed Box Headboard (F) and Bed Box Headboard (G) as shown. 2. Using Screw driver to tighten 16 Pieces of Wood Screws (11) clockwise as shown. 11 H G 11 I I I F I I I I I 20 pcs STEP 7 ： Push the Under Box of bed into the Bed.
