Operating Instructions

PROGRAMMED PLAYBACK
This feature allows you to program up to 20 CD tracks and 99 MP3 tracks on a disc for
playback in any desired order.
1.) Press the PROGRAM button to enter the Program mode. The program number briefly
shows ‘ P01', the Program indicator flashes.
2.) Press SKIP REV. or SKIP FWD. button to select the first track number you wish to
enter in the program memory. Example: Track Number ‘008’.
3.) When the desired track number appears on the display, press the PROGRAM button
again to enter track in memory. The Program number briefly show ‘P02’.
4.) Repeat steps 2-3, selecting a different track number each time until you have entered
up to 20 CD tracks and 99 MP3 tracks in the program memory.
NOTE: You may program the same track number to play multiple times in the program
sequence if desired.
5.) Press PLAY/PAUSE button to begin programmed playback. The PROGRAM indicator
stops flashing and remains ‘ On’. Playback will begin with the first track you
programmed and will continue until the last programmed track has played. Press SKIP
FWD. or SKIP REV. button to select a specific track in the programmed tracks.
6.) After the last track has played, the player stops and the display shows the total
number of tracks on the disc and Cd 5 seconds in turn. However, the program
sequence has been canceled in the memory.The program indicator goes ‘Off’.
RANDOM PLAYBACK
In CD/MP3 playback, press RANDOM button once enter into random function. RANDOM
indicator remains ‘On’. Press SKIP FWD. or SKIP REV. button to choose the tracks in the
disc randomly. Press RANDOM button again or press STOP button to cancel RANDOM
function, the RANDOM indicator goes ‘Off’.