Operating Instructions

6.) Look at Fig7. Match the holes on the U-type(B) bracket according with the holes on
the TR-W102U host cabinet as shown. Rotate clockwise four screws D(H) into the
holes on the sides and one screw B(F) inot the middle and tighten.
7.) Look at Fig8. It shows the assembled TR-W102U host cabinet with the U-type bracket
(B) apparatus.
8.) Look at Fig9. Nest the assembled big horn speaker (A) into the tubing of the
TR-W102U host cabinet in the correct position. Rotate one screw B(F) clockwise into
the hole. Tighten clockwise with a Philip’s head screwdriver. It should be able to be
turned freely by rotating the big horn speaker lightly.