User's Guide

Installation & User Guide
Assembling the Magnetic Mount
The magnetic mount is shipped as shown in Figure 2 below.
1. First open the adjustable magnetic base and attach (2) support struts using (2) flange head screws as
shown in Figure 3.
2. Do not fully tighten the screws.
Figure 2: Magnetic mount components shipped. From left to right: (1) adjustable magnetic base, (2)
support struts, (6) flange head screws
Figure 3: Attaching the support struts
3. Begin to close the adjustable base and ensure support struts sit on the inside of brackets on the
adjustable mount as shown in Figure 4