User's Guide

Installation & User Guide
Connecting QGateway to Magnetic Base
After the base has been configured to the correct installation angle, the QGateway must be attached to the
base.
1. Place the QGateway on its mounting surface on the adjustable magnet mount with the front of the
QGateway facing the hinge of the adjustable magnet mount (See Figure 6 & Figure 7).
Figure 6: QGateway mounting surface
Figure 7: Front of QGateway facing the same direction as the adjustable mount hinge
2. Align the holes on the mounting tabs of the QGateway with the threaded holes on the QGateway
mounting surface of the adjustable magnet mount.
3. Use the (2) remaining flange head screws to secure the QGateway to the adjustable magnet mount
(See Figure 8 & Figure 9).