User's Guide

Installation & User Guide
Figure 16: Rolling the magnet mount onto the magnetic surface (cont.)
Power on and Confirm QGateway Cell Signal
After placing the QGateway in the correct install position, follow the steps to ensure the QGateway is powered
on and has cellular signal.
1) Depress the power button to turn on the QGateway
2) Wait 3 minutes for the QGateway system to activate
3) Press and hold the status button
4) Confirm the green LED is on, indicating the unit has successfully powered on
5) Confirm the amber/yellow LED is on, indicating the unit has cellular connection.
Figure 17: QGateway LEDs indicating power and cellular connection