Installation Manual

LAYOUT & INSTALLATION
MARK RACEWAY PATH
6
2
HELPFUL HINTS
Using a Pencil, Straight Edge and Level, lightly
mark the wall with the Centerline of your
Raceway path.
When running straight lengths of Raceway against a
wall corner or molding edge:
Do not butt the Raceway sections directly against
the corner. Leave a small space (about 4mm) to
install your Couplers over the Raceway.
To mark the centerline, place a Straight Coupler
backwards against the corner. Use the Center
Locator Notch to mark the exact centerline
location for Raceway placement.
MOLDING
MOLDING