User`s guide

4-18 KEEX-2010 Series User Guide

X ECP Mode Use DMA

Select a DMA channel for the parallel port for use during ECP mode.

Options - 3, 1.

X PWRON After PWR-Fail

Allows you to set the the “Power On After Power Fail” function.

Options - Former-Status, On, Off

X USB Device Setting

Press Enter to select USB Device Setting.

　 USB Device Setting

Onboard USB 1.0 Controller

Onboard USB 2.0 Controller

USB Operation Mode

USB Keyboard Function

USB Mouse Function

USB Storage Function

*** USB Mass Storage Device Boot Setting ***

USB Mass Storage Device

[Enabled]

[High Speed]

[Enabled]

[Auto mode]

Item Help

__________________

Menu Level ¾

↑↓→←Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults

Table 4-13. USB Device Setting

X Onboard USB 1.0 Controller

Turns on/off the onboard Universal Host Controller.

Options - Enabled, Disabled

X Onboard USB 2.0 Controller

Turns on/off the onboard Enhanced Host Controller.

Options - Enabled, Disabled

X USB Operation Mode

High Speed mode will automatically operate at either high speed or full/low speed, depending on the

device. Full/Low Speed mode will operate at full/low speed.

Options - High Speed, Full/Low Speed