User`s guide
Preface 
13 
KEEX-7100 Series User’s Manual 
date of purchase. 
To reduce risk of damage, returns of product must be in a Quanmax shipping 
container. If the original container has been lost or damaged, new shipping 
containers may be obtained from Quanmax Customer Service at a nominal cost. 
Quanmax owns all parts removed from repaired products. Quanmax uses new and 
reconditioned parts made by various manufacturers in performing warranty repairs 
and building replacement products. If Quanmax repairs or replaces a product, its 
warranty term is not extended. 
Shipments not in compliance with this Limited Warranty Return Policy will not be 
accepted by Quanmax. 
Limitation of Liability 
In no event shall Quanmax be liable for any defect in hardware, software, loss, or 
inadequacy of data of any kind, or for any direct, indirect, incidental, or 
consequential damages in connection with or arising out of the performance or use 
of any product furnished hereunder. Quanmax’s liability shall in no event exceed the 
purchase price of the product purchased hereunder. The foregoing limitation of 
liability shall be equally applicable to any service provided by Quanmax or its 
authorized agent. 
  Maintaining Your Computer 
Environmental Factors 
  Temperature 
The ambient temperature within an enclosure may be greater than room 
ambient temperature. Installation in an enclosure should be such that the 
amount of air flow required for safe operation is not compromised. 
Consideration should be given to the maximum rated ambient temperature. 
Overheating can cause a variety of problems, including premature aging and 
failure of chips or mechanical failure of devices. 
If the system has been exposed to abnormally cold temperatures, allow a 
two-hour warm-up period to bring it up to normal operating temperature before 
turning it on. Failure to do so may cause damage to internal components, 
particularly the hard disk drive. 
  Humidity 
High-humidity can cause moisture to enter and accumulate in the system. This 
moisture can cause corrosion of internal components and degrade such 










