QutePC-1600 0.
Contact Info: Quanmax Inc. 5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District, Taipei, Taiwan 114 Tel: +886-2-2799-2789 Fax: +886-2-2799-7399 Visit our site at: www.quanmax.com © 2012 Quanmax Inc. All rights reserved. The information in this user’s guide is provided for reference only. Quanmax does not assume any liability arising out of the application or use of the information or products described herein.
Content Content Content....................................................................................................................... 3 Figures & Tables......................................................................................................... 4 Safety Instructions ...................................................................................................... 5 Before You Begin ..................................................................................
Figures & Tables Figures & Tables Figure 1 Front Panel .................................................................................. 15 Figure 2 Rear Panel ................................................................................... 17 Figure 3 Mechanical Dimensions ............................................................... 18 Figure 4 DP/ VGA/ HDMI ........................................................................... 19 Figure 5 Connecting USB mouse & keyboard.......................
Safety Instructions Safety Instructions Before You Begin Before handling the product, read the instructions and safety guidelines on the following pages to prevent damage to the product and to ensure your own personal safety. Refer to the “Advisories” section in the Preface for advisory conventions used in this user’s guide, including the distinction between Warnings, Cautions, Important Notes, and Notes. Always use caution when handling/operating a computer.
Safety Instructions When Working Inside a Computer Before taking covers off a computer, perform the following steps: 1. Turn off the computer and any peripherals. 2. Disconnect the computer and peripherals from their power sources or subsystems to prevent electric shock or system board damage. This does not apply when hot swapping parts. 3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the following page. 4.
Safety Instructions remove the component’s antistatic packing material until you are ready to install the component in a computer. Just before unwrapping the antistatic packaging, be sure you are at an ESD workstation or grounded. This will discharge any static electricity that may have built up in your body. When transporting a sensitive component, first place it in an antistatic container or packaging. Handle all sensitive components at an ESD workstation.
Preface Preface How to Use This Guide This guide is designed to be used as step-by-step instructions for installation, and as a reference for operation, troubleshooting, and upgrades. NOTE Driver downloads and additional information are available under Downloads on our web site: www.quanmax.com. Unpacking When unpacking, follow these steps: 1. After opening the box, save it and the packing material for possible future shipment. 2. Remove all items from the box.
Preface interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Preface account, send an email to support@quanmax.com to apply for one. All product(s) returned to Quanmax for service or credit must be accompanied by a Return Material Authorization (RMA) Number. Freight on all returned items must be prepaid by the customer who is responsible for any loss or damage caused by common carrier in transit. Returns for Warranty must include a Failure Report for each unit, by serial number(s), as well as a copy of the original invoice showing the date of purchase.
Preface turning it on. Failure to do so may cause damage to internal components, particularly the hard disk drive. Humidity High-humidity can cause moisture to enter and accumulate in the system. This moisture can cause corrosion of internal components and degrade such properties as electrical resistance and thermal conductivity. Extreme moisture buildup inside the system can result in electrical shorts, which can cause serious damage to the system.
Preface Line conditioners keep a system’s AC power source voltage at a fairly constant level and, therefore, can handle brownouts. Because of this added protection, line conditioners cost more than surge protectors. However, line conditioners cannot protect against a complete loss of power. Uninterruptible Power Supply Uninterruptible power supply (UPS) systems offer the most complete protection against variations on power because they use battery power to keep the server running when AC power is lost.
Chapter 1 Chapter 1 Introduction Overview The QutePC-1600 is a Box PC with a volume of just 0.6-liter that is ideal for space critical applications. This embedded hardware platform is designed with Intel® Atom D2550 Processor which provides with excellent performance. System is supported with Intel® NM10 Express chipset, and DDR3 SO-DIMM up to 4GB. Featured are 1x eSATA,1x 2.5” SATA HDD, 1x GbE, 4x USB 2.0, 1x VGA, 1x HDMI,1x DP.
Chapter 1 Product Specifications Construction Plastic Casing System Board Intel® Cedarview-D Atom D2550 (1M Cache,1.86 Ghz) Intel® NM10 Express Chipset Memory DDR3 800/1066 SO-DIMM up to 4GB ■Front I/O panel : 1x Phone Jack for Line-Out 1x Phone Jack for MIC-In 1x Push button (w/LED) for power on/off 1x WiFi LED 1x HDD LED 4x USB2.0 1x eSATA/USB Combo connector I/O Panel ■Rear I/O panel : 1x DC JACK 1x RJ-45, GbE port 1x DP 1x VGA 1x HDMI 1x 3G antenna ( Optional ) 1x Clear CMOS 1x 2.
Chapter 1 System tour Refer to the diagrams below to identify the components of the system. Front Panel Figure 1 Front Panel USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs. eSATA The eSATA connector provides an external connectivity for mass storage devices.
Chapter 1 Headphone Jack The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplified speakers or headphones. WiFi LED The WiFi LED will light when the WiFi is on. HDD LED The hard disk LED blinks when data is being written into or read from the HDD. Power Switch The power switch allows powering ON and OFF the system.
Chapter 1 Rear Panel Figure 2 Rear Panel Ethernet The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. DC Jack The supplied power adapter converts AC power to DC for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. Kensington Lock Slot The slot is used for attaching a lock-and-cable apparatus.
Chapter 1 Mechanical Dimensions 130 x 38.5 x 115.
Chapter 2 Chapter 2 Getting Started Setting up your PC Connecting the monitor Connect the DP/ VGA/ HDMI cable from your display to the DP/ VGA/ HDMI port.
Chapter 2 Connecting USB mouse & keyboard Your QutePC-1600 does not come with a keyboard and mouse, but you can use any USB keyboard or mouse with your computer. eSATA/USB USB Figure 5 Connecting USB mouse & keyboard NOTE Using a third-party USB mouse or keyboard may require software drivers. Check the manufacturer’s website for the latest software drivers.
Chapter 2 Connecting to a network device Connect one end of a network cable to the LAN port on the system rear panel and the other end to a hub or switch. RJ45 Figure 6 RJ45 connector Turning on the system 1. 2. 3. 4.
Chapter 2 Mounting your PC to a monitor 1. Secure the VESA mounting kit to your monitor with four screws. NOTE To fasten the metal shelf, your monitor must comply with VESA75 or VESA100 standard. The VESA mounting kit is optional. 2. 3. Place the QutePC-1600 on the VESA mounting bracket and make sure the bracket is hooked with the fins of the system housing. Secure the screw with the VESA mounting bracket and make sure the QutePC-1600 is solidly secured to the display.
Chapter 2 Anti-theft protection with a Kensington Lock The QutePC-1600 has a Kensington lock slot for the Kensington MicroSaver. With the Kensington MicroSaver, a sturdy steel cable, you can attach your QutePC-1600 to a stationary object and protect your PC from theft.
Chapter 3 Chapter 3 AMI BIOS Setup Overview This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact Quanmax. NOTE: The BIOS menus and selections for your product may vary from those in this chapter.
Chapter 3 Main Menu The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the “<” and “>” cursor keys to navigate between menu screens.
Chapter 3 Advanced Menu Table 3 Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Security Server Onboard LAN Controller [Enabled] Onboard LAN Boot [Disabled] Audio Controller [Enabled] Mgmt Save & Exit > Display Configuration > Power Management Configuration > CPU Advanced Configuration > SATA Configuration > Trusted Computing > USB Configuration > H/W Monitor Select Screen ↑↓ Select Item Enter: Select +- Change Opt.
Chapter 3 Table 4 Advanced Menu – Display Configuration BIOS SETUP UTILITY Main Advanced Boot Security Server Mgmt Save & Exit Display Configuration Fixed Graphics Memory Size IGFX – Boot Type [128 MB] [VBIOS Default] Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Chapter 3 Table 5 Advanced Menu –Power Management Configuration BIOS SETUP UTILITY Main Advanced Boot Security Server Mgmt Save & Exit Power Management Configuration ACPI Sleep State [S3 (Suspend to RAM)] Restore AC Power Loss Resume By PCIE Device Resume By RTC Alarm [Power Off] [Disabled] [Disabled] EUP Power Saving Mode [Disabled] >Watchdog Timer Configuration Select Screen ↑↓ Select Item Enter: Select +- Change Opt.
Chapter 3 Table 6 Advanced Menu –CPU Advanced Configuration BIOS SETUP UTILITY Main Advanced Boot Security Save & CPU Advanced Configuration Hyper-Treading Execute Disable Bit Limit CPUID Maximum EIST [Enabled] [Enabled] [Disabled] [Enabled] Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Chapter 3 Table 7 Advanced Menu –SATA Configuration BIOS SETUP UTILITY Main Advanced Boot Security Save & Exit SATA Configuration Configure SATA as [ AHCI ] SATA Port 1 SATA Port 2 TOSHIBA MK8046 (80.0G) Not Present Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Chapter 3 Table 9 Advanced Menu –USB Configuration BIOS SETUP UTILITY Main Advanced Boot Security USB Configuration Save & . USB Devices: Select Screen 1 Drive, 1 Keyboard, 1 Mouse Legacy USB Support [Enabled] ↑↓ Select Item EHCI Hand-off [Disabled] Enter: Select Mass Storage Devices: SanDisk +- Change Opt. [Auto] F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Chapter 3 Table 10 Advanced Menu –H/W Monitor BIOS SETUP UTILITY Main Advanced Boot Security Save & PC Health Status CPU Warning Temperature >CPU FAN Configuration CPU Temperature Memory Temperature System Temperature [Disabled] : +55 C : +41 C : +42 C CPU FAN Speed 4065RPM +3.3V +VCORE +VGFX +1.05V +1.5V +5VDUAL +VIN +3.3VSB : +3.328V : +1.056V : +1.008V : +1.048V : +1.505V : +5.086V : +19.096V : +3.360V Select Screen ↑↓ Select Item Enter: Select +- Change Opt.
Chapter 3 Boot Menu Table 11 Boot Menu BIOS SETUP UTILITY Main Advanced Boot Security Save & Boot Configuration Full Screen LOGO Display [Disabled] Setup Prompt Timeout Bootup NumLock State 1 [On] Boot Option Priorities Select Screen Boot Option #1 Boot Option#2 Hard Drive BBS Priorities [UEFI: SanDisk] [SATA PM: Toshiba… ] ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit Version 2.14.1219.
Chapter 3 Security Menu Table 12 Security Menu BIOS SETUP UTILITY Main Advanced Boot Security Save & Exit Password Description If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup.
Chapter 3 Save Changes and Exit Exit system setup after saving the changes. Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select [Yes] to save changes and exit. Discard Changes and Exit Exit system setup without saving any changes.
Chapter 4 Chapter 4 Driver Installation If your QutePC-1600 does not come with an operating system pre-installed, you will need to install an operating system and the necessary drivers to operate it. After you have finished assembling your system and connected the appropriate power source, power it up using the power supply and install the desired operating system. You can download the drivers for the QutePC-1600 from the Quanmax website at www.quanmax.com and install as instructed there.
