User's Manual

User Manual

Model:8001

The raw product is 2.4 G. Four-channel remote

control car. The transmitter adopts. Powered by two 1.5V

dry batteries. Receiving, powered by 3.7V lithium

batteries. ,

-First install the battery as required. ,

-Turn on the remote control power switch.The

indicator light keeps flashing at this time.

-Quickly enter the search for the screen status, And

then turn on the power switch of the remote control car. ,

But the remote control indicator is off. The secret

indicates that the pairing is successful.

-Press forward on the remote control. Back, turn left

and turn right button., Security check, and the car

respectively perform corresponding actions.

PAGE 1
User Manual Model:8001 The raw product is 2.4 G. Four-channel remote control car. The transmitter adopts. Powered by two 1.5V dry batteries. Receiving, powered by 3.7V lithium batteries. , -First install the battery as required. , -Turn on the remote control power switch.The indicator light keeps flashing at this time. -Quickly enter the search for the screen status, And then turn on the power switch of the remote control car. , But the remote control indicator is off.
PAGE 2
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept an y interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.