User's Manual Part 1

103
Changing batteries
www.gateway.com
Changing batteries
If your notebook is plugged into an AC outlet, you can change the battery
while the notebook is turned on. If your notebook is not plugged into an AC
outlet, you must turn it off while changing the batteries.
To replace the battery:
1 If your notebook is on and is plugged into an AC outlet, go to step 2.
-OR-
If your notebook is on and is not plugged into an AC outlet, save your
work and turn off the notebook.
2 Close the LCD panel and turn your notebook over.
3 Slide the battery release latch and slide the battery out of the bay.
Warning Danger of explosion if battery is incorrectly replaced.
Replace only with the Gateway Solo 1450 Li-Ion or Ni-MH
battery. Discard used batteries according to the
manufacturer’s instructions.
The battery used in this device may present a fire or
chemical burn hazard if mishandled. Do not disassemble,
heat above 212°F (100°C), or incinerate. Dispose of used
battery promptly. Keep away from children.