User Manual Part 1

46
Chapter 3: Getting Started
www.gateway.com
Connecting to an Ethernet network
If your notebook has a network jack, you can connect it to a 10/100 Ethernet
network.
To connect to a network:
1 Insert one end of the network cable into the network jack on the
left side of the notebook.
2 Insert the other end of the network cable into a network wall jack. Ask
your network administrator to help you select the correct network jack.
Your notebook is now physically connected to the network. Your network
administrator can help you log onto your network.
Solo9550.book Page 46 Tuesday, June 19, 2001 3:18 PM