User Manual Part 4

172
Chapter 12: Upgrading Your Notebook
www.gateway.com
Installing memory
Your portable computer uses memory modules called SO-DIMMs (Small
Outline Dual Inline Memory Modules). The modules are available in various
capacities and any module can be placed in any available slot. Use only PC133
memory modules for upgrading your memory.
To add or replace memory modules:
1 Follow the instructions under “Preventing static electricity discharge” on
page 171.
2 Turn off the notebook (do not go to Hibernate mode) and close the cover.
3 Disconnect the power and modem cables.
4 Turn the notebook over, then remove the main battery (and second
battery, if installed). For more information, see “Changing the main
battery” on page 132 and “Installing a second battery” on page 134.
5 Remove the memory bay cover screw, then remove the memory bay
cover.
Warning Disconnect the power supply cord, remove the battery, and
disconnect the modem cable before you remove the
memory bay cover. Replace the cover before you restore
power or reconnect the modem cable.
Memory bay
cover
Solo9550.book Page 172 Tuesday, June 19, 2001 3:18 PM