User Manual Part 4

174
Chapter 12: Upgrading Your Notebook
www.gateway.com
8 Hold the new or replacement module at a 30-degree angle and press it
into the empty memory slot. This module is keyed so that it can only
be inserted in one direction. If the module does not fit, make sure the
slot in the module lines up with the tab in the memory bay. (The
illustration below may look different from your computer.)
9 Gently push the module down until it clicks in place.
10 Replace the memory bay cover and cover screw, insert the battery,
connect the AC adapter, and turn on your notebook.
Important Use only PC133 (133 MHz) memory modules.
Solo9550.book Page 174 Tuesday, June 19, 2001 3:18 PM