User Manual Part 4

178
Chapter 12: Upgrading Your Notebook
www.gateway.com
9 Lift the end of the hard drive kit furthest from the connector, then
remove the kit from the bay.
10 Place the new hard drive kit in the bay and slide it into the connector.
11 Replace the two screws to secure the hard drive kit to the notebook.
12 Reinstall the 3.5” module.
13 Reinstall the security screw (Solo 9500 only).
14 Reinstall the battery and connect the power.
Solo9550.book Page 178 Tuesday, June 19, 2001 3:18 PM