User Manual Part 5

236
Chapter 16: Reinstalling Device Drivers
www.gateway.com
Updating device drivers in
Windows 98, Windows Me, or
Windows 2000
The Gateway System Restoration Kit contains a device driver update utility that
works over the Internet. If you do not have an Internet Service Provider, the
update utility works by direct dialing the device driver update service.
To update Windows 98, Windows Me, or Windows 2000 device drivers:
1 Place Disc 1 of the System Restoration Kit into your CD/DVD drive. The
System Restoration Kit program starts. Go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2 Click Start, then select Run. The Run dialog box opens.
3 In the Open text box, type D:\RUNMENU.EXE (where D is the drive letter
of your CD/DVD drive).
4 Click OK. The System Restoration Kit program starts.
5 If the Welcome to the System Restoration Kit window opens, close it by
clicking
OK.
6 Click the Update tab.
HelpSpot For more information on updating device drivers,
double-click the HelpSpot icon on your desktop.
Important If your system came equipped with a wireless device, only
use the drivers approved for the country the device will be
used in. See the Gateway System Restoration Kit or the
Gateway Technical Support Web site.
If your system came equipped with an internal embedded
wireless device, see “Safety, Regulatory, and Legal
Information” on page 281 for general wireless regulatory
and safety guidelines.To find out if your system has an
internal wireless device, check the label (see “Identifying
your model” on page 23).
Solo9550.book Page 236 Tuesday, June 19, 2001 3:18 PM