Specifications

server fanmodules
Fan Modules
!
CAUTION!
DISCONNECT THE POWER SUPPLY UNIT FROM THE POWER SOURCE BEFORE
REMOVING FAN MODULES. FAILURE TO DO SO COULD RESULT IN DAMAGE TO
THE EQUIPMENT OR PERSONAL INJURY.
Removing a Fan Module
It is not necessary to replace all fan modules at once. The following procedure
displays the removal of all fan modules for demonstration purposes.
Prerequisite:
♦ Remove the top cover. See Opening the Top Cover on page 1-6.
1. Locate the target fan module and disconnect the fan cable from its respective
connector on the mainboard. Then unroute and carefully pull the fan cable
upwards out of the clip.
Figure 1-8: Disconnecting the Fan Cables
1-8