Specifications

s er v e r n vme solId s T a Te dIsks
NVMe Solid State Disks
Removing a NVMe Solid State Disk
Prerequisite:
♦ Remove the top cover. See Opening the Top Cover on page 1-6.
♦ Remove the air duct. See Removing the Air Duct on page 1-7.
1. Loosen the captive screws securing the SSD tray to the chassis.
Figure 1-24: Loosening the Screws
2. Release the retainer and slide the SSD assembly backwards to disengage it from
the latch. Then remove the SSD tray from the chassis.
Figure 1-25: Removing the NVMe SSD Assembly
1-18