Specifications

s erver r Iser 1 b oards
Installing a Riser 1 Board
Prerequisite:
♦ Remove the top cover. See Opening the Top Cover on page 1-6.
♦ Remove the air duct. See Removing the Air Duct on page 1-7.
♦ Remove the riser 1 assembly. See Removing the Riser 1 Assembly on page
1-22.
1. Align and install the riser 1 board on the riser bracket.
2. Secure the riser 1 board with screws.
Figure 1-41: Installing the Riser 1 Board
3. To install another riser 1 board, repeat the previous steps.
1-27