Specifications

r aCk I nsTallaTIon s ysTem r aCk I nsTallaTIon o vervIew
Rack Installation Overview
Review thoroughly the documentation that is included with the rack cabinet for safety
and cabling instructions. Before installing the rails in the rack cabinet, review the
following guidelines:
• Plan the rail installation starting at the bottom of the rack cabinet.
• Remove the rack doors and side panels to provide easier access during
installation.
• Always adhere to safe practices when lifting or moving components.
• Inspect all equipment before installing on the rack cabinet. Replace any defective
equipment.
Installing the Rails
Review thoroughly the documentation that is included with the rack cabinet for safety
and cabling instructions. Before installing the rails in the rack cabinet, review the
following guidelines:
!
CAUTION!
IF YOU ARE INSTALLING MORE THAN ONE SERVER, INSTALL THE FIRST
SYSTEM IN THE LOWEST AVAILABLE POSITION IN THE RACK CABINET.
1. Locate the position to install the left rail. Then install the 6 mounting pins onto the
designated holes on the rack.
2. Align the left rail with the installed 6 mounting pins. Then slide the rail backwards
until it locks into place.
3. Secure the front side of the left rail with screw.
Mounting Pin
Figure 2-1: Installing the Left Rail
2-2