User Manual

2. Getting started
Before start using your Apollo, you need a
fully charged battery and a valid SIM card.
2.1 Inserting the battery
& SIM card
2
1. Look at the back of your Apollo.
Gently press down and slide out the rear
cover in the direction shown below.
2. Hook and lift the battery upward,
as shown below, in order to remove
it.
26
3. Unlock the SIM card holder by
pushing it to the right and lifting it up.
Insert the SIM card with the metallic
part facing
down and the clipped corner in the right
direction.
4. Gently press down the SIM card
holder and lock it by pushing to the left.
Make sure the holder does not bounce
back upwards.
5. Insert the battery and rear cover back
accordingly by reversing Steps 2 and 1.